Quick Answer
For 14", 16", 18" and 20" flex duct, choose the line by where the duct runs, not just by size: non-insulated aluminum or polyester flex duct (made 3"–24") for conditioned spaces and equipment connections, R6 or R8 insulated flex duct (made 4"–20") for attics, plant rooms and hot, humid climates, and soundproof insulated duct only up to 16". Standard sizes can be ordered in small quantities and mixed on one order; custom or private-label orders typically start at 500–1,000 pieces, with 15–20 business days lead time for catalog items.
Large-diameter flex duct is where specification mistakes get expensive: an R8 jacket that will not fit the ceiling void, a soundproof line that stops at 16", or cartons that fill a container twice as fast as planned. This guide covers what a contractor, distributor or importer needs to decide before sending an RFQ — size availability, insulation, packing and order terms. It does not cover airflow sizing; if you still need to pick a diameter from CFM, do that with your HVAC engineer first.
Hstube has made flexible duct in Dongyang, Zhejiang since 1996 on 10 production lines, with an annual output of about 26 million meters and customers in 60+ countries — including Middle East, Latin American and Australian projects where 14"–20" trunk sizes are common.
Which Hstube Flex Duct Lines Come in 14, 16, 18 and 20 Inch?
Not every construction is made in every large size. This is the availability table we use when quoting large-diameter orders:
| Product line | Diameter range | 14" | 16" | 18" | 20" | Standard length |
|---|---|---|---|---|---|---|
| Aluminum flexible duct | 3"–24" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| Non-insulated flexible air duct | 4"–24" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| Metalized polyester / polyester flex duct | 3"–24" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| PVC combi / PVC steel wire duct | 3"–24" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| Fiberglass insulated flex duct (R4.2) | 4"–20" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| R6 / R8 insulated flex duct | 4"–20" | ✓ | ✓ | ✓ | ✓ | 25 ft (7.6m) |
| Soundproof insulated duct | 4"–16" | ✓ | ✓ | — | — | 25 ft (7.6m) |
| Semi-rigid aluminum duct | 3"–12" | — | — | — | — | 8 ft (2.4m) |
Diameters are inner (core) diameters. Custom lengths and in-between sizes can be quoted on request.
The two limits that catch buyers most often: insulated duct stops at 20", and soundproof duct stops at 16". If your drawing shows a 22" or 24" insulated run, it usually means rigid or spiral duct with external insulation, or two parallel smaller runs — settle that with the designer before the order, not after.
Which Line Fits Which Large-Diameter Project?
There is no single "best" 16" flex duct. These picks are grouped by project situation, in no ranking order:
| Project situation | Usual choice | Why |
|---|---|---|
| Supply/return trunks inside conditioned space | Non-insulated aluminum or polyester flex duct | No insulation needed; lighter and smaller packed volume per meter |
| Roof plant rooms, attics, hot and humid climates (Gulf, Southeast Asia) | R6 or R8 insulated flex duct | Insulation plus metalized polyester vapor barrier to limit heat gain and condensation |
| Offices, hotels, meeting rooms up to 16" | Soundproof insulated duct | Acoustic lining; not made above 16" |
| Equipment connections and temporary runs | PVC combi or PVC steel wire duct | Abrasion and moisture resistance, easy to reposition |
| Industrial exhaust or dust collection above 20" | Canvas fabric duct hose | Made up to 48" (1200mm); this is industrial hose, not HVAC flex duct |
Whatever the line, large-diameter flex duct is heavier per meter and sags more between supports. Plan hangers at no more than 5 ft spacing with wide straps (see our duct hangers), and order duct connectors in matching sizes — ours are made from 4" to 20".
R6 vs R8 at 14–20 Inch: How Much Bigger Is the Outside?
At small diameters the insulation thickness hardly matters. At 16"–20" it decides whether the duct fits the ceiling void and how many pieces fit in a container. Our R6 duct uses about 40mm (1.6") of insulation and R8 about 80mm (3.1"), on each side of the core. Approximate nominal outer diameters before compression:
| Core (inner) diameter | R6 outer, approx. | R8 outer, approx. |
|---|---|---|
| 14" (355mm) | ~17" (435mm) | ~20" (515mm) |
| 16" (400mm) | ~19" (480mm) | ~22" (560mm) |
| 18" (450mm) | ~21" (530mm) | ~24" (610mm) |
| 20" (500mm) | ~23" (580mm) | ~26" (660mm) |
Calculated as core + 2 × nominal insulation thickness; installed outer diameter varies with jacket and how loosely the insulation lofts. Ask us for the measured value for your exact item.
Two practical consequences: a 20" R8 duct needs roughly 26" of clear space plus hanger clearance, and R8 roughly doubles the packed volume of the insulation layer compared with R6. If the energy code allows R6 for your climate zone, it is often the better choice for tight ceilings and for freight cost. Our insulated duct page explains which R-value suits which climate.
How Is Large-Diameter Flex Duct Packed and Shipped?
Flex duct ships compressed along its length, so a 25 ft piece packs much shorter than it installs. What drives container planning at 14"–20" is the carton cross-section, which grows with diameter and, for insulated duct, with R-value. Points to settle before you confirm the order:
- Pieces per carton and carton size, by diameter. We give these per item in the quote — use them, not small-size rules of thumb, when estimating how many 18" or 20" pieces fit in a 20' or 40' container.
- Mixed-size loading. Most project orders combine trunk sizes (14"–20") with branch sizes. Tell us the full size list so the packing plan can fill gaps in the container with smaller cartons.
- Labels and private-label packaging. Custom printing, packaging and labeling under your own brand are available for OEM and distributor orders — specify carton marks (size, R-value, length, project code) in the RFQ.
- Shipping origin. Bulk and custom orders are produced and shipped from our Dongyang factory. Our Houston, TX facility keeps limited inventory of popular items for US customers; larger or custom orders are made to order.
MOQ, Samples and Lead Time for 14–20 Inch Flex Duct
| Item | Terms |
|---|---|
| Standard catalog sizes | Small quantities accepted; mixed diameters on one order |
| Custom sizes, private label, OEM packaging | Typically 500–1,000 pieces, depending on product |
| Samples | Standard samples at cost; typically 7–10 business days |
| Lead time, catalog items | 15–20 business days after payment |
| Lead time, custom / OEM | 30–45 days depending on quantity and complexity |
On certification: UL 181 listing for our flexible ducts is in progress, not granted. If your market or project specification requires a specific certificate, list it in your inquiry so we can confirm what we can document before you order. More order questions are answered on our FAQ page.
What Should a Large-Diameter Flex Duct RFQ Include?
A complete inquiry gets a complete quote — price, packing and lead time — in one reply. Include:
- Each diameter and quantity (pieces or meters), e.g. "16" × 300 pcs, 18" × 120 pcs".
- Construction: non-insulated aluminum/polyester, PVC, or insulated with R-value (R4.2 / R6 / R8).
- Length per piece if not the standard 25 ft (7.6m).
- Installation environment: conditioned space, attic or roof, humid or coastal site.
- Required certificates or test documents for your market.
- Packaging: neutral or private label, carton marks.
- Destination port and preferred trade terms.
Not sure which construction fits? Start from our flexible duct range or send your drawing to the sales team.
Get a Quote for 14–20 Inch Flex Duct
Send your size list, insulation and destination. We reply within 24 hours with pricing, lead time and packing details.
Request a quote for your project
Tell us your requirements. We respond within 24 hours on business days.
